Power Transformers - Open Wound, 230V Primary

   
  Transformer Catalog - English
 

High quality encapsulated toroidal transformers with a single 230V a.c. 50/60Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.

  • Fully encapsulated to UL94V-0

  • Small size and low weight compared with traditional stacked lamination types.

  • Extremely low level of radiated magnetic field

  • Very low induced noise (hum)

  • Very low iron loss.

  • Double insulated primary leads.

  • 100% electrical and flash tested

  • High quality manufacturing and testing in accordance to EN61558, EN60742, EN60950, EN60065, VDE0551, VDE0550 and BS415

  • Tested and Approved by KEMA to EN61558. Click here for more info

  • UL Recognised to UL506, under family approval file E215495

 

Important Installation Note
Under no circumstances should both ends of the fixing bolt contact a metal chassis or frame as this would create a 'shorted turn' causing irreparable damage.

Rated VA Part Number
(xxx=Sec voltage)
Regulation
% Typical
Temperature
Rise [K]
Dimensions*
Diameter
[mm]
Height
[mm]
Fixing
Hole
Weight [Kg]
15 0015P1-2-xxxK 16 26 63 35 M5 0.30
30 0030P1-2-xxxK 18 40 82 39 M5 0.45
50 0050P1-2-xxxK 14 42 87 42 M5 0.65
80 0080P1-2-xxxK 14 53 104 44 M6 0.90
120 0120P1-2-xxxK 10 52 104 52 M6 1.20
160 0160P1-2-xxxK 9 55 115 53 M6 1.50
225 0225P1-2-xxxK 8 60 126 52 M6 1.90
300 0300P1-2-xxxK 8 60 176 65 M6 2.30
500 0500P1-2-xxxK 6 68 148 65 M8 3.50
  • Leads: PVC insulated 150mm long.

  • Secondary voltage tolerance <1% at nominal input.

  • UL recognised for Insulation Class A (105'C)

  • Maximum ambient operating temperature +40'C

  • Meets all requirements of Class E (120'C)


Home      Brochures     About Us     Products      Quality      Sales      Distribution      News