Power Transformers - Open Wound, 230V Primary

   
  Transformer Catalog - English
 

High quality open style toroidal transformers with a single 230V a.c. 50/60Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.

  • Small size and low weight compared with traditional stacked lamination types.

  • Extremely low level of radiated magnetic field

  • Very low induced noise (hum)

  • Very low iron loss.

  • Double insulated primary leads.

  • Supplied with mounting kit.

  • 100% electrical and flash tested

  • High quality manufacturing and testing in accordance to EN61558, EN60742, EN60950, EN60065, VDE0551, VDE0550 and BS415

  • Tested and Approved by KEMA to EN61558. Click here for more info.

  • UL Recognised to UL506, under family approval file E215495

Important Installation Note
Each transformer is supplied with a dished washer and protection pads for single hole fixing. Ensure that the pads are fitted above and below the transformer winding and that the dished washer is on top of the upper pad. Do not overtighten the fixing bolt (not supplied) as this could damage the winding.
 

Under no circumstances should both ends of the fixing bolt contact a metal chassis or frame as this would create a 'shorted turn' causing irreparable damage.
 

The following data sheets are available as Adobe Acrobat PDF files.

  Rated VA Part Number
(xxx=Sec voltage)
Regulation
% Typical
Temperature Rise [K] Dimensions*
Diameter [mm]
Height [mm] Weight [Kg]
15 0015P1-2-xxx 16 26 60 31 0.30
30 0030P1-2-xxx 18 40 70 32 0.45
50 0050P1-2-xxx 14 42 80 33 0.65
80 0080P1-2-xxx 14 53 93 38 0.90
120 0120P1-2-xxx 10 52 93 46 1.20
160 0160P1-2-xxx 9 55 105 42 1.50
225 0225P1-2-xxx 8 60 112 47 1.90
300 0300P1-2-xxx 8 60 115 58 2.30
500 0500P1-2-xxx 6 68 136 60 3.50
625 0625P1-2-xxx 5 67 136 68 4.30
800 0800P1-2-xxx 5 69 162 60 5.10
1000 1000P1-2-xxx 5 72 162 70 6.50

Home      Brochures      About Us     Products      Quality      Sales      Distribution    Sitemap    News